Warm-Up Sets vs. Working Sets: What’s the Difference and How Many Do You Need?

November 2, 2026

warm-up sets vs working sets

You open your workout and see “2 to 3 warm-up sets, then 3 work sets.” So… do the warm-up sets count? Can you skip them? And how are you supposed to know what weight to use for any of this?

We get these questions a LOT, so let’s get into it (:

Here’s the short version: warm-up sets prepare you for the lift, and work sets are the challenging sets that count toward the programmed training target. Your warm-ups should gradually get heavier without turning into extra hard sets, because you want to show up to your work sets ready to push. Not already tired.

Warm-Up Sets vs. Work Sets at a Glance
 Warm-Up SetsWork Sets
Main purposePrepare for the exerciseCreate the intended training stimulus
LoadLighter than working weightProgrammed working load
EffortEasy to moderateChallenging
Close to failure?Usually noDepends on programmed RIR/effort
RepsGenerally decrease as weight risesFollow programmed rep range
Count toward programmed sets?NoYes
Should you track them?Helpful, but separatelyYes
Main goalPractice + prepareProgress + adaptation

The easiest way to remember it: warm-up sets get you ready to train, and work sets are the training you’re getting ready for.

What Is a Warm-Up Set?

A warm-up set is a lighter set you do before your programmed work sets. Think of it like a rehearsal. The goal isn’t to make the set hard. The goal is to practice the movement and gradually get ready for the heavier load that’s coming.

Warm-up sets can help you:

  • Practice the movement before the weight gets heavy
  • See how the exercise feels that day
  • Build gradually toward your working weight
  • Decide whether the weight you planned still makes sense
  • Avoid one giant jump from nothing to a challenging load

That last one matters more and more as the weight gets heavier. Warming up for a 20 lb lateral raise and warming up for a heavy squat or deadlift are two VERY different situations (cuz I definitely can’t walk into the gym cold and suddenly go rip a 300 lb deadlift).

One important clarification though: warm-up sets are not the same as hard training sets. Ten easy reps at half your working weight don’t do the same job as a challenging set performed close to your programmed effort target. Warm-ups are there to help you get more out of the work sets that follow.

And if you’re looking for what should happen before you start ramping your exercise-specific sets, read our guide to how to warm up before lifting weights.

What Is a Work Set?

A work set (you’ll also hear it called a working set, but in our Paragon workouts we call them work sets) is a challenging set performed at the intended load, rep range, and effort prescribed in your program. It’s the part of the exercise you’re actually trying to progress.

Here’s an example of what you’ll commonly see in our Paragon workouts:

Barbell RDL
2 to 3 warm-up sets, then:
3 work sets x 8 to 12 reps
Goal: 2 to 3 RIR
Rest about 2 minutes

The warm-up sets help you get to that working weight. The three sets of 8 to 12 are the actual programmed training. And that RIR number? It matters.

What Does RIR Mean?

RIR stands for reps in reserve, aka an estimate of how many good reps you could still do before reaching failure.

  • 3 RIR: you probably had about three good reps left
  • 2 RIR: around two
  • 1 RIR: maybe one more
  • 0 RIR: you’re at or very near failure

So in the RDL example above, your work sets should finish with roughly two or three good reps still in the tank. You’re not redlining or emptying the tank, but you’re definitely busting your buns and working hard.

Not sure what that effort target should actually feel like? Our Reps From Failure 101 guide explains RIR and how Paragon uses it to choose appropriate training loads.

Do Warm-Up Sets Count as Work Sets?

Usually, no. If your program says 2 warm-up sets + 3 work sets, you’re doing five total sets, but only three of them are programmed work sets. The sets just have different jobs.

Warm-up sets are intentionally done well below the effort of your work sets. If a “warm-up” accidentally turns into a tough set close to failure, it created more fatigue than intended… but that still doesn’t make it one of your programmed work sets.

Better move: keep your warm-ups easy enough that they prepare you without stealing performance from the work that matters.

Do You Really Need Warm-Up Sets?

For heavier compound lifts? Usually, yes. Think squats, deadlifts, RDLs, bench press, overhead press, and heavy rows.

Most people don’t want to walk in cold and immediately hit their heaviest planned deadlift set (that’s basically choosing violence). Building up gradually gives you a chance to find your positions, practice the movement, and feel the increasing load before the sets actually count.

But Not Every Exercise Needs the Same Warm-Up

This is where people can accidentally turn a 60-minute workout into a two-hour event.

If you’re starting your session with heavy squats, several ramp-up sets can make sense. If you’re doing lateral raises after six other upper-body exercises? Probably not. Our big compound lifts are usually parts A and B of the workout, and by the time you get to parts D, E, F, etc., you’re already warm and you’ve often already used the muscles involved. So you may only need a warm-up set or two before cruising. That’s totally ok!

Exercise situationTypical approach
First heavy compound lift2 to 4+ progressive warm-up sets
Second major compound1 to 2 warm-up/feeler sets may be enough
Machine or accessory liftOften 0 to 2
Small isolation movement late in workoutSometimes 0 to 1

These aren’t rigid rules. Heavier and more technical movements generally need more prep, and lighter exercises later in a session usually need less.

How much warming up you need can also change with the type of training you’re doing. Our guide to strength training vs. hypertrophy explains why heavier strength work and higher-rep hypertrophy work are structured differently.

How Many Warm-Up Sets Should You Do?

There’s no magic number. It depends on the exercise, how heavy you’re lifting, your experience, where the movement falls in your workout, and how you’re feeling that day.

For a heavier compound movement, the basic pattern is: weight goes UP, reps come DOWN. For example:

  1. Very light load for 5 to 10 reps
  2. Around half the expected work weight for several reps
  3. Moderately heavy weight for fewer reps
  4. Optional heavier prep set for 1 to 3 reps
  5. Begin your work sets

Our current Fall 2026 Hypertrophy + Cardio Cycle gives members a similar progression when building toward working weight: roughly 50 to 60% for 6 to 10 reps, 70 to 75% for 3 to 5 reps, and an optional 85 to 90% single before the challenging work sets. That’s a guideline, not a formula every single exercise has to follow.

Example: How to Warm Up for a 100-Pound RDL

Let’s say your planned RDL work sets are 3 x 8 to 12 at 100 lb. Your warm-up might look something like this:

SetWeightRepsPurpose
Warm-up 1Empty bar / very light8 to 10Groove movement
Warm-up 250 lb6 to 8Start adding load
Warm-up 375 lb4 to 5Prepare for heavier weight
Optional warm-up 485 lb2 to 3Final feeler
Work sets100 lb8 to 12Programmed training

Now notice what DOESN’T happen here: 10 reps at 50, 10 reps at 75, 10 reps at 85, and then somehow three hard sets at 100. That’s not warming up anymore. That’s sneaking an entire extra workout into your warm-up (!!!)

As the load goes up, your reps generally come down so you can feel the heavier weight without piling up unnecessary fatigue.

How Do You Know When You’ve Done Enough Warm-Up Sets?

Your warm-up is probably doing its job when:

  • The movement feels comfortable
  • Your technique feels consistent
  • You’ve felt a reasonably heavy load before the work set
  • Your final jump to working weight doesn’t feel enormous
  • You still feel fresh

If your final warm-up feels harder than it should, that’s useful information. You don’t get bonus points for ignoring it (:

How to Pick Your Working Weight

Warm-up sets aren’t just preparation. They’re also information gathering. Don’t know your work weight for a lift? That’s also the point of the warm-up sets!

This is especially helpful when:

  • You’re new to an exercise
  • You haven’t done the lift in a while
  • You’re unsure what today’s working weight should be
  • The program changed rep ranges
  • You just feel different than expected that day

As the load climbs, ask yourself: Does the movement feel normal today? Is my technique staying controlled? Does the planned weight still seem realistic?

If the final warm-up feels shockingly heavy, starting your work sets a little lighter may make sense. If everything feels unusually easy, you may have room to go up. And if you end up needing an extra warm-up set to feel it out? No sweat. That’s exactly what they’re there for.

Your first work set then becomes the final check. If it lands way above or below your prescribed RIR, adjust the remaining sets based on your program’s guidance.

Common Warm-Up Set Mistakes

Skipping Warm-Ups Entirely

This one matters most before heavy compound lifts. You lose your chance to gradually work up to your working weight and see how the movement feels first. Pls don’t skip them (:

Making Warm-Up Sets Too Hard

Your warm-up is not a secret fourth work set. Save the challenging effort for the sets that are programmed to be challenging.

Doing Too Many Reps as the Weight Gets Heavy

As the load goes up, warm-up reps should generally come down. You don’t need to prove you can do ten reps at every stop along the way.

Using the Same Warm-Up for Every Exercise

A heavy squat at the start of your session and a biceps curl at the end don’t need the same prep.

Counting Warm-Ups as Programmed Work Sets

Keep them separate. If the program says three work sets, do three work sets after the prescribed warm-up.

Turning the Warm-Up Into a 25-Minute Event

More isn’t automatically better. The goal is to get to your work sets prepared AND fresh, not prepared and exhausted.

Frequently Asked Questions About Warm-Up Sets

Not when your program lists them separately. If a workout says two warm-up sets followed by three work sets, do the warm-ups first and then complete all three work sets.

For a heavy compound lift early in the workout, two to four or more progressive sets may make sense depending on the weight and your experience. Later exercises usually need fewer.

No. Warm-up sets should generally stay comfortably away from failure. Their job is preparation, not fatigue.

Usually, yes. A common approach is to gradually increase the load while decreasing the reps as you get closer to your working weight.

Not necessarily. A heavy exercise early in the session may need several. A small isolation exercise near the end of a workout might only need one light set, or none if you already feel ready to go.

For practical programming purposes, easy warm-up sets are generally kept separate from the challenging work sets used to track training volume and progression.

Usually just long enough to change the weight, feel ready, and keep your technique solid. You don’t need to treat every light warm-up like a full work set with a long rest period. As the warm-up gets heavier, taking a little more recovery can make sense.

How Paragon Approaches Warm-Up Sets

When a Paragon workout lists warm-up sets separately from work sets, that’s intentional. The warm-ups help you build toward the load, and the work sets are where you’re trying to hit the prescribed reps and RIR. The number of warm-ups can also change depending on the movement.

Success (and lack of success) both tend to leave clues. When someone’s following a good program but not seeing the progress they want, skipping the programmed warm-ups or not picking the right weights are two of the most common culprits we see. So if a movement feels unfamiliar, use the movement demo and lifting guidance in the app. If you’re unsure about your effort, use the programmed RIR. And if something feels off, that’s exactly the kind of thing to figure out before the hard sets begin.

The Bottom Line

Warm-up sets get you ready. Work sets are where you push.

Gradually increase the weight during your warm-up while bringing the reps down so you reach your working load without wasting energy. Use those sets to practice the lift, see how you’re moving that day, and dial in your weight. Then save your hardest effort for the sets that are actually supposed to be hard (:

Explore Paragon’s training programs if you want structured workouts with warm-up guidance, effort targets, movement demos, and the programming already handled for you. Paragon currently offers physique, performance, and shorter-time training options.

Reply...
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/
Get started today
/

ready to take the leap?

we've changed
over 20,000+ lives with our unique approach to fitness

come get strong with us